Toshiba E-studio 210c Imaging Manual page 65

(6) Enter information of "Profile Description", "Media", and "Appear in Driver as" about profile and click "OK".
• Details of each information are as follows:
Profile Description:
Media:
Appear in Driver as...: Select a name, to be associated with a profile, from the custom profiles (Output-1
Enter a name of a profile to be displayed on the properties of the PostScript
printer driver for bi-directional communication. Checking the "Default" box can
define the applicable profile as a default profile. The default profile is used when
"Output Profile" under "Expert Settings" is set to "Printer's Default" (This applies
to the GA-1120 and GA-1130 only). It is also used for processing a file output
from the Fiery Downloader.
Select a calibration set to be associated with a profile.
* This setting is critical to image quality. Make sure that correct information is
entered.
to Output-10 for the GA-1120 and GA-1130 and Plain paper, Thin Paper, Thick 1
to 4 Paper, Special Paper, Transparency, or Output-1 to Output-10 for the GA-
1121 and GA-1131) to be displayed on the PostScript printer driver for one way
communication. A custom profile name can be selected only from the dropdown
list of this menu. Each custom profile name can be associated with only one
profile. Check the "Appear in Driver as..." box to associate the selected custom
profile to the profile.
* Always check the "Appear in Driver as" box for one-way communication or for
using the profile with Macintosh.
* For details of bi-directional communication, refer to the User Software Installation
Guide of each printer controller.
3. Printer-specific Adjustments
e-STUDIO210c/310c, e-STUDIO211c/311c
3.2