Toshiba E-studio 210c Imaging Manual page 103

For Macintosh
Open the print settings dialog box and adjust "Sharpness" by selecting a desired value within a range
between "+1" and "+4".
• When Sharpness is set to "+4", a sharpest print image will be obtained.
* A menu to be selected depends on a combination between printer controller and OS. For the combination,
refer to the table below.
Controller OS
GA-1120
OS 9.x
GA-1130
OS 9.x
GA-1121
OS X
OS 9.x
GA-1131
OS X
Cautions after the completion of the adjustment
• The adjustment may possibly cause rough edge of images contained in low-resolution bitmap data. Therefore,
perform the adjustment carefully, while checking the image quality.
• For PCL printing with the GA-1131, the effect of the adjustment will be reflected not only to images but also to
text and illustrations. Therefore, perform the adjustment carefully, while checking the print quality.
"Printer Specific Options"
"Image Quality" "Sharpness"
"Printer Features" "Feature Sets: Image Quality 1"
"Printer Specific Options"
"Printer Features" "Feature Sets: Image Quality 1"
3. Printer-specific Adjustments
Menu
"Sharpness"
"Sharpness"
"Sharpness"
"Sharpness"
e-STUDIO210c/310c, e-STUDIO211c/311c
3.9