Toshiba E-studio 210c Imaging Manual page 36

2. Copier-specific Adjustments
(3) Select the "BACKGROUND ADJUSTMENT" from the "COLOR" menu on the Control Panel and press the
[ +] button to increase the density of the background.
After the setting, make a copy and check the image quality.
If further image quality adjustments are still necessary after the density of the background is set to the
highest level, the service technician should use the next procedure.
(4) Enter adjustment mode [05] and change the set value for code [698 to 707] to adjust the density of the
background.
* The highlighted area becomes highly visible when the density of the background is increased.
Color mode
Full color
Black
* Set the value in about 10 increments while checking the copy until the optimum value is obtained.
<Note> "Making the highlighted area highly visible (increasing the density of the background)" and
"eliminating the background color (decreasing the density of the background)" are the adjustments
which are contrary to each other. When the background color is made darker to make the highlighted
area highly visible, the hue of the background sometimes changes.
2.4
e-STUDIO210c/310c, e-STUDIO211c/311c
Original mode [05] code
Text/photo 05-698
Text 05-699
Printed image 05-700
Photo 05-701
Map 05-702
Text/photo 05-703
Text 05-704
Printed image 05-705
Photo 05-706
Map 05-707
Value recommended
Make it greater than 128.
Default
128