Toshiba E-studio 210c Imaging Manual page 130

3. Printer-specific Adjustments
For Windows (PCL)
Open the properties of the printer driver, select "Image Quality" on the "Fiery Printing" tab, and adjust
"Sharpness". Select a desired value for sharpness within a range between "+1" and "+4".
• When Sharpness is set to "+4", a sharpest print image will be obtained.
For Macintosh
Open the print settings dialog box and adjust "Sharpness" by selecting a desired value within a range
between "+1" and "+4".
• When Sharpness is set to "+4", a sharpest print image will be obtained.
* A menu to be selected depends on a combination between printer controller and OS. For the combination,
refer to the table below.
Controller
GA-1120
GA-1130
GA-1121
GA-1131
3.15
e-STUDIO210c/310c, e-STUDIO211c/311c
OS
OS 9.x "Printer Specific Options"
OS 9.x "Image Quality"
OS X "Printer Features"
OS 9.x "Printer Specific Options"
OS X "Printer Features"
Menu
"Sharpness"
"Sharpness"
"Feature Sets: Image Quality 1"
"Sharpness"
"Feature Sets: Image Quality 1"
"Sharpness"
"Sharpness"