3. Printer-specific Adjustments
3.11.2 To Make Image Smoothing Settings
Procedure
* Perform the adjustment in accordance with the procedure below.
* All the adjustments are made by the service technician, and by the user.
* This adjustment is available only for PostScript printing with the GA-1121 and GA-1131.
(1) Open the properties of the printer driver and change the "Image Smoothing" settings.
For Windows (PostScript)
Open the properties of the printer driver, select "ColorWise" on the "Fiery Printing" tab, and change the
"Image Smoothing" settings to "Below 150 ppi" or "Below 90 ppi".
• "Image Smoothing" applies only to images (bitmap data).
3.11
e-STUDIO210c/310c, e-STUDIO211c/311c