Toshiba E-studio 210c Imaging Manual page 39

(3) Enter adjustment mode [05] and change the set value for code [698 to 707] to adjust the density of the
background.
Color mode Original mode
Full color Printed image
Black
Printed image
<Note> "Eliminating the background color (decreasing the density of the background)" and "making the
highlighted area highly visible (increasing the density of the background)" are the adjustments
which are contrary to each other. When the background is made lighter, the highlighted area
sometimes becomes quiet.
Cautions after the completion of the adjustment
The adjustment may possibly cause the highlighted area to be quiet. Therefore, perform the adjustment
carefully, while checking the printout.
Remarks
Enter the value within the recommended value range mentioned in the procedures. Otherwise, it may cause a
loss in copier performance, such as image failure.
[05] code
Text/photo 05-698
Text 05-699
05-700
Photo 05-701
Map 05-702
Text/photo 05-703
Text 05-704
05-705
Photo 05-706
Map 05-707
2. Copier-specific Adjustments
Value recommended
Make it greater than 128.
e-STUDIO210c/310c, e-STUDIO211c/311c
Default
128
2.5