Toshiba E-studio 210c Imaging Manual page 83

(b) Select the specified profile from among the "Output Profile" options and click the [OK] button.
For Macintosh
Open the print settings dialog box and change the "Output Profile" settings to the specified profile.
* A menu to be selected depends on a combination between printer controller and OS. For the combination,
refer to the table below.
Controller OS
GA-1120
OS 9.x
GA-1130
OS 9.x
GA-1121
OS X
OS 9.x
GA-1131
OS X
Cautions after the completion of the adjustment
The adjustment may possibly cause poor reproducibility of fine gray lines and light gray areas, a dark gray area
to be blurred, an entire print image to look rough containing black (because of K toner positively used), and a
part of image such as photo image to look unusual. Therefore, perform the adjustment carefully, while checking
the printout.
"Printer Specific Options"
"ColorWise" "Output Profile"
"Printer Features" "Feature Sets: ColorWise 3"
"Printer Specific Options"
"Printer Features" "Feature Sets: ColorWise 3"
3. Printer-specific Adjustments
Menu
"Output Profile"
"Output Profile"
"Output Profile"
"Output Profile"
e-STUDIO210c/310c, e-STUDIO211c/311c
3.4