Toshiba E-studio 210c Imaging Manual page 102

3. Printer-specific Adjustments
Procedure
* Perform the adjustment in accordance with the procedure below.
* All the adjustments are made by the service technician, and by the user.
(1) Open the properties of the printer driver and change the "Sharpness" settings.
For Windows (PostScript)
Open the properties of the printer driver, select "Image Quality" on the "Fiery Printing" tab, and adjust
"Sharpness". Select a desired value for sharpness within a range between "+1" and "+4".
• When Sharpness is set to "+4", a sharpest print image will be obtained.
For Windows (PCL)
Open the properties of the printer driver, select "Image Quality" on the "Fiery Printing" tab, and adjust
"Sharpness". Select a desired value for sharpness within a range between "+1" and "+4".
• When Sharpness is set to "+4", a sharpest print image will be obtained.
3.9
e-STUDIO210c/310c, e-STUDIO211c/311c