Toshiba E-studio 210c Imaging Manual page 108

3. Printer-specific Adjustments
For Macintosh
Open the print settings dialog box to change the "Image Smoothing" settings to "Below 150 ppi" or "Below
90 ppi".
• "Image Smoothing" applies only to images (bitmap data).
* A menu to be selected depends on a combination between printer controller and OS. For the combination,
refer to the table below.
Controller
GA-1120
GA-1130
GA-1121
GA-1131
Cautions after the completion of the adjustment
The effect of "Image Smoothing" is to interpolate data to be reflected only to bit map data such as photo image
or capture image on a PC screen (BMP, GIF, JPEG, TIFF, PICT). Setting "Image Smoothing" to higher
resolution (for example, "Below 300 ppi") or "On" enables the smoothing effect to be reflected to higher-
resolution data. Do not use "Image Smoothing" unless really necessary because it is not so effective for images
of more than 150 ppi (dpi) and it puts a load on the printer controller causing a longer output time. When
"Image Smoothing" is set to "Automatic", the same effect as when "Image Smoothing" is set to "Below 150 ppi"
is obtained.
3.10
e-STUDIO210c/310c, e-STUDIO211c/311c
OS
OS 9.x "Printer Specific Options"
OS 9.x "ColorWise" "Image Smoothing"
OS X "Printer Features"
OS 9.x "Printer Specific Options"
OS X "Printer Features"
Menu
"Image Smoothing"
"Feature Sets: ColorWise 4"
"Image Smoothing"
"Feature Sets: ColorWise 4"
"Image Smoothing"
"Image Smoothing"