Remote Mailbox - Fuji Xerox ApeosPort-III C2201 Administrator's Manual

Cover Page
Select whether to send transmissions with a cover note attached. If attached, specify
comments relating to the recipients and sender to be included in the cover pages.
Comments must be registered in advance.
For information on comment registration, refer to "Add Fax Comment" (P.228).
1
Select [Print Cover Page].
2
Select [Recipient's Comment].
3
Select [On], and select a comment from the
displayed list of comments.
Note • Select [
screen or [
4
Select [Save].
5
To insert a sender's comment, select
[Sender's Comment].
6
Repeat Steps 3 and 4.
Maximum Image Size
Select the maximum storage size from [A3], [B4], and [A4], to match the recipient's paper size
or processable profile.
Delay Start
Set whether or not to use a delayed start transmission.
If the machine's system clock is set to the 24-hour display, [AM] and [PM] do not appear. For
information on the system clock, refer to "Time" (P.123).

Remote Mailbox

Select whether to use mailbox communications. Note that when using mailbox
communications, the other party's mailbox number and passcode must be set in advance.
1
Select [On].
2
Enter a recipient's mailbox number with the
numeric keypad, and select [Next].
3
If a passcode is set, enter the passcode with
the numeric keypad, and select [Save].
Note • If no passcode is set, do not input
anything, and select [Save].
F Code
Select whether to use F code communications.
F Code is the transmission procedure set by the Communications and Information Network
Association of Japan and is the T.30 (communication protocol) method for using sub-
addresses that are standardized by the ITU-T.
] to return to the previous
] to move to the next screen.
Setup
5
225