Changing The Paper Settings - Fuji Xerox ApeosPort-III C2201 Administrator's Manual

2 Paper and Other Media

Changing the Paper Settings

The following describes how to change the paper type for Trays and how to set image
quality processing by individual paper type.
After loading paper in the trays, specify the types of the paper loaded and the image
quality suited to each paper type. Image quality best suited to the paper type can be
obtained by setting the desired image processing to particular paper types. For more
information, refer to "Image Quality" (P.130).
Note
1
Press the <Log In/Out> button.
2
2
Enter the Administrator ID with the numeric
keypad or the keyboard displayed, and
select [Enter].
When a passcode is required, select [Next]
and enter the system administrator's
passcode, then select [Enter].
Note
3
Select [Tools].
44
• Users can name Custom 1 to Custom 5 displayed in the paper type. For information on how
to set names to Custom 1 to Custom 5, refer to "Custom Paper Name/Color" (P.128).
• The [Setup] screen, which can be displayed by selecting [Setup] in the [All Services] screen,
allows you to change the paper type setting without entering the System Administration
mode, if you have configured the settings to do so in advance. For more information, refer to
"Customize Paper Supply Screen" (P.129)
• The default user ID is "11111".
• The default passcode is "x-admin".
1 2 3
4 5 6
7 8 9
0 #
C
<Log In/Out> button