Fax Received Options; Reduce/Enlarge Presets - Fuji Xerox ApeosPort-III C2201 Administrator's Manual

Fax Received Options

Fax Received Options allows you to specify a method for classifying received
documents into specified mailboxes.
Mailbox Selector Setup
When the classification by line type is specified, the received documents are classified by line
type and stored in the specified mailboxes.
1
Select [Mailbox Selector Setup].
2
Select the line you want to register, and
select [Change Settings].
Note • The displayed items may be different,
3
Select [On].
4
Enter the mailbox number (3-digits) where
you want to store the documents, with the
numeric keypad.
5
Select [Save].
Output Destination Setup
In [Output Destination Setup], you can set the output destination for each receiving line, and
the destination for a mailbox print.
Note • This feature does not appear for some models. An optional package is necessary. For more
• The displayed items may be different, depending on the options installed.
Fax Received - Line 1 to 5
Specifies output tray for each line.
Public Mailbox Printed Documents
Specifies output tray for public mailbox for polling.
Enable Output Destination Setup
When [On] is selected, the output tray of the finisher becomes a Fax/Internet Fax dedicated
tray.
Note • When papers, such as heavyweight paper which cannot be output to the finisher tray, are

Reduce/Enlarge Presets

You can set the magnifications shown in [Preset %] for [Reduce/Enlarge] in the [Layout
Adjustment] screen. You can assign any magnification to the buttons other than [100%]
and [Auto %].
depending on the options installed.
information, contact our Customer Support Center.
used, the machine uses the output tray even for the jobs other than the Fax/Internet Fax
service.
Fax Service Settings
5
193