Print Universal Unique Id (Apeosport Series Models Only) - Fuji Xerox ApeosPort-III C2201 Administrator's Manual

5 Tools
Image Log Transfer
Image logs created on the machine can be stored and managed by transferring to a log man-
agement server. [Image Log Transfer] allows you to set how and when to transfer image logs.
Log Transfer
Sets whether or not to transfer an image log.
Selects [Disabled] or [Enabled].
Assurance Level
Sets the log transfer assurance level to [Low] or [High].
Logs To Transfer
Sets whether or not to automatically transfer image logs to a log management server.
The options available are [Pause], [Transfer Per Job Basis], and [Accumulate & Transfer].
Transfer Timing
Sets when to transfer image logs to a log management server.
The options available are [At the end of the job], [At the end of selections], [At power On], and
[When maximum is reached].

Print Universal Unique ID (ApeosPort Series Models Only)

You can print UUIDs for each print job. The printed UUIDs can be used as search keys
to search for print job logs when using an application, such as ApeosWare Accounting
Service (optional).
5
When the Image Log Control feature is enabled, the UUIDs can be printed on the image
logs that are to be transferred to a log management server. On the log management
server, you can then search for an image log using the UUID as a search key.
By getting an image log using the UUID, you will know "when" and "by whom" and "with
what service" the document was processed. This prevents leakage of confidential
information.
Note
For details on image logs, refer to "Image Log Control (ApeosPort Series Models Only)" (P.139).
Print Universal Unique ID
Select whether to print Universal Unique IDs.
Important • If [Print Universal Unique ID] is set to [Yes], the automatic size detection feature will be
Print Position
Select the print position from 6 positions: [Top Left], [Bottom Left], [Top Center], [Bottom
Center], [Top Right], and [Bottom Right].
Print Position Adjustment
Adjusts the print positions in the vertical and horizontal directions from 0 to 100 mm, and from
0 to 200 mm, respectively, in 0.5 mm increments.
Note
Print Position (Side2)
When making 2-sided copies, set the position where the UUID is printed on Side 2.
140
• You can authorize a user to temporarily cancel force watermark. For information, refer to
"User Role and Authorization Groups" (P.332).
disabled for Tray 5 (Bypass).
• The adjustment value is 0 mm at the edge of paper. Increasing the value moves the print
position toward the center of the paper. Note, however, that the adjustment value in left and
right directions for [Top Center] or [Bottom Center] is 100 mm at the center of paper. When
you selected [Top Center] or [Bottom Center], therefore, set the value to 100 mm first and
then specify the desired value.