Fax Receiving Mode - Fuji Xerox ApeosPort-III C2201 Administrator's Manual

4 Machine Status
2
Select [Factory Defaults] or [Custom
Settings].
3
When you select [Custom Settings], select
the memory number to be used.
Factory Defaults
You can use the factory default settings.
Custom Settings
The numbers stored in the memory appear.
Password
For PDF emulation, if a password is set for PDF files, set the password here in
advance. PDF files can be printed only when their password matches the password set
here.
You can use up to 32 characters for the password.
1
Press [Password].
2
Enter a password of up to 32 characters, and select [Save].
4

Fax Receiving Mode

You can set a fax receiving mode.
For information on automatic and manual fax receiving modes, refer to "4 Fax" > "Receiving Faxes" in
the User Guide.
1
Select [Fax Receiving Mode].
2
Select a fax receiving mode.
Manual Receive
Allows you to manually receive a fax from a
remote machine. This mode is convenient when you want to confirm the sender or use
an external telephone for a telephone call before fax reception.
Auto Receive
Automatically starts receiving a fax from a remote machine.
96