When Using Tcp/Ip - Fuji Xerox ApeosPort-III C2201 Administrator's Manual

When "Switch the machine off" is displayed
A NetWare problem
occurred.
When the print output is not as you expected
The print language of the
print data and the print
language configured on the
machine are different.
When no notification is received
The possible causes, check points and remedies when no notification is received on
the computer which instructed a print job are as follows.
When the printing problems are not notified
The user is not listed on the
print server notification
recipients.
When the completion of the job is not notified
The [Notify] option is not
specified when the computer
transmitted the print data.
Netware command
[CASTOFF] has been issued
on the computer.

When using TCP/IP

The possible causes, check points, and remedies for problems when using TCP/IP
(LPD) are as follows.
Cause
Cause
Confirm the print language
on the machine.
Cause
Use PCONSOLE on the
computer to check if the job
user or user's group has
been registered under [Print
Server Information] >
[Printer] > [Printer xxx
Environment Settings] >
[Notify].
Cause
Confirm if the [Notify] option
is specified when
transmitting the print data.
Check point
Restart the machine.
Switch on the machine after
-
the display completely
disappears.
Check point
Match the print language of
the print data and the print
language configured on the
machine.
Check point
Add the name of the job user
or the name of the user's
group to [Notify].
Check point
Specify the [Notify] option
when transmitting the print
data.
Issue the NetWare
- command [CASTON] on the
computer.
Network-related Problems
Remedy
Remedy
Remedy
Remedy
387
14