Paper Type Mismatch; Print User Id - Fuji Xerox ApeosPort-III C2201 Administrator's Manual

5 Tools
Note
Display Message
Does not use a substitute tray, but displays a paper loading message.
Use Larger Size
Replaces with the next larger paper size than that selected, and prints at the same size.
Use Closest Size
Replaces with the closest paper size to that selected, and prints. If necessary, the printing is
automatically reduced in size.
Note
Select Tray 5
Replaces with the paper in the Tray 5 (Bypass).

Paper Type Mismatch

Set the action to be taken when the paper type loaded in the paper tray does not match the
paper type specified.
Print
Prints with the paper loaded in the tray.
Display Confirmation Screen
A confirmation screen appears to show procedures.
5
If a paper type mismatch occurs during print job processing, the machine ignores the paper
type specified on the print driver and selects another type of paper loaded on the machine.
Display Paper Supply Screen
The [Paper Supply] screen appears, prompting you to load another type of paper in the
selected tray. The print job can be processed if you follow the instructions displayed on the
screen.
Note
Unregistered Forms
Set whether to print a job or not if a form specified for printing in a form data file (overlay
printing) is not registered on the machine. If you specify [Print], since the specified form is not
present, only the data is printed.
This setting is added to the print settings menu when there is a print specification from the
host computer.

Print User ID

When printing using a print driver, specify whether to print user identification information on
paper. The first 64 letters of the user information is printed.
Select a position to print from [Top Left], [Top Right], [Bottom Left], and [Bottom Right].
Note
Banner Sheet
Select whether to output banner sheets to separate different outputs.
A user name and document name are printed on a banner sheet.
Note
178
• When documents are printed using emulation such as ESC/P-K and HP-GL/2, this setting is
not valid and a message prompting you to load paper appears on the screen.
• If there is a client specification, the client specification takes precedence.
• If you load another type of paper in the tray by following the screen instructions, the paper
type setting for the tray will also be changed to the setting displayed on the screen
automatically.
To use the Print User ID feature, the user ID must be set on the print driver
•
beforehand. For more information, refer to the print driver's online help.
When user authentication information is not available, "Unknown User" is printed.
•
• Even if the stapler feature is enabled, banner sheets are not stapled.
• On a print job from a Macintosh, the document name does not appear on the banner sheet.
• When printed, banner sheets are counted by meter.