Paper Types; Loadable Quantity And Sheets For Supported Paper - Fuji Xerox ApeosPort-III C2201 Administrator's Manual

2 Paper and Other Media

Paper Types

This section describes the kinds of paper available for this machine.
Use of inappropriate paper may result in paper jams, or may cause reduced print
quality, malfunctions, and other problems. To make full and effective use of the
machine's performance, we recommend using only paper recommended by Fuji Xerox.
If you want to use paper not recommended by Fuji Xerox, contact our Customer
Support Center.
Do not use conductive paper such as origami paper, carbonic paper or conductively-
coated paper. When paper jam occurs, it may cause short-circuit and eventually a
fire accident.
Important • The printed image may fade due to moisture such as water, rain or vapor. For more
2

Loadable Quantity and Sheets for Supported Paper

When using commonly used paper (known as printable paper) for copying or printing,
make sure that it complies with the following specifications.
Tray 1 to 4
Tray 5 (bypass)
* When using 80 g/m
Important • Printing with paper whose type or size differs from the paper specified by the print driver, or
Note
30
WARNING
information, contact our Customer Support Center.
• When copying or printing on heavyweight paper or outputting to the side tray, paper
sometimes is curled.
Paper Tray
60 to 256 g/m
Ream Weight: 51.6 - 220.1 kg
55 to 256 g/m
Ream Weight: 47.3 - 220.1 kg
2
paper
printing from a tray not supporting the loaded paper can result in paper jams. To ensure
correct printing, select the correct paper size, paper type, and paper tray.
• Weight means a weight of 1 m
• Ream weight means a weight of 1,000 sheets of paper in duodecimo size (788 x 1,091 mm).
• When copying with a non-standard size paper from the Tray 5 (bypass), you must manually
enter the paper size. If you use non-standard size paper often, you can preset the size on
the machine. Then the preset size appears under [Standard Sizes] in the [Tray 5] screen.
For more information, refer to "Tray 5 - Paper Size Defaults" (P.129).
• Image quality best suited to the paper type can be obtained by setting the desired image
processing to particular paper types. For more information, refer to "Image Quality" (P.130).
Weight Loadable Quantity*
2
560 sheets
2
Up to 10 mm
100 sheets
2
of a paper sheet.