Preset Buttons; Copy Defaults - Fuji Xerox ApeosPort-III C2201 Administrator's Manual

3
Select the feature to be displayed, and
select [Save].
Note • Select [
4
Repeat Steps 2 to 3 as required.

Preset Buttons

Paper Supply - Button 2 - 5
For the feature buttons appearing in [Paper Supply] on the [Copy] screen, you can set the
paper tray.
Reduce/Enlarge - Button 3 - 5
For the feature buttons appearing in [Reduce/Enlarge] in the [Copy] screen, you can set the
ratio.
You can select the ratio from the registered R/E Preset buttons.

Copy Defaults

This sets the default settings of copy feature settings. When the power is turned on or
the machine returns from a Power Save mode, or when the <Clear All> button is
pressed, the system returns to the defaults set here. By setting features you often use
as defaults, you can avoid extra operations required in use.
Paper Supply
Set the default value for [Paper Supply] in the [Copy] screen.
When the default value of [Reduce/Enlarge] is set to [Auto %], [Auto Paper] cannot be
selected for [Paper Supply].
Reduce/Enlarge
Set the default value for [Reduce/Enlarge] in the [Copy] screen.
Select the ratio from [100%], [Auto %], and the buttons registered as R/E Preset buttons.
When the default setting for [Paper Supply] is [Auto Paper Select], [Auto %] cannot be
selected for [Reduce/Enlarge].
For information about R/E Preset buttons, refer to "Reduce/Enlarge Presets" (P.156).
Output Color
Set the default value for [Output Color] in the [Copy] screen.
When [No Default] is selected, select the output color in the [Copy] screen before making
copies.
Single Color
Set the default value for [Output Color] > [More...] > [Single Color] in the [Copy] screen. You
can select from six preset colors and six custom colors.
For information about custom colors, refer to "Annotations - Create Comments" (P.156).
] to return to the previous
screen or [ ] to move to the next screen.
Copy Service Settings
149
5