Connection Of Disk Array Unit As Additional Unit - NEC NF2300-SR412E User Manual

5.3

Connection of Disk Array Unit as Additional Unit

This section describes the procedure of installing the disk array unit itself additionally.
To make any of the sample connections, you need to connect two host bus adapters with
the host system and two FC-AL HUBs.
Six LC-LC cables (or six SC-SC cables and four FC conversion cables) are necessary for
connecting the FC-AL HUB and host bus adapters.
a) If the host bus adapter connectors and FC-AL HUB connectors are of "LC" type
FC cables (LC-LC cable)
FC-AL HUB
The following describes a sample connection when a single disk
array unit is installed additionally in a system containing another disk
array unit.
For the actual expansion job and system configuration, contact your
service engineer of the maintenance service agent with expert
knowledge on the disk array unit.
FC-AL HUB
FC cables (LC-LC cable)
48
FC cables (LC-LC cable)