COMMUNICATION
8.6
Remote Monitor Panel II
t
8-4
Power Xpert
9395 UPS (450–550 kVA) Installation and Operation Manual
As an option, an RMP II can be installed to monitor the operation of the UPS system
from virtually any location within the facility, up to 150m (500 ft) from the UPS. The
RMP II contains backlit status indicators and a local horn. The RMP II can be
flush‐mounted or surface‐mounted on a desktop, or secured to a wall. Figure 8‐2
shows an RMP II.
Figure 8‐2. Remote Monitor Panel II
S
www.eaton.com/powerquality
164201701 Rev 4