Circuit Breakers; Using The Lcd Control Panel - Eaton Power Xpert Plus 1 Installation And Operation Manual

UPS OPERATING INSTRUCTIONS
7.2

Using the LCD Control Panel

t
7-2
Power Xpert 9395 UPS (450–550 kVA) Installation and Operation Manual
7.1.1

Circuit Breakers

Optional circuit breaker (CB1) is used to control the AC input to the UPS rectifier. CB1
is not available with the separate UPM rectifier feed configuration.
The following paragraphs describe the UPS control panel, including controls and
indicators, and how to monitor UPS operation. The control panel (see Figure 7‐2) is
located on the front door of the UPS.
The control panel consists of:
S
A liquid crystal display (LCD) (1)
S
A horizontal row of pushbutton switches (2)
S
A vertical column of status indicators (3). See paragraph 7.2.1.
The following paragraphs describe using the UPS control panel to monitor the UPS.
See paragraph 7.3 for use of the operational controls.
When the unit powers up, the screen displays the Eaton logo as shown in Figure 7‐2.
To advance to the Main Menu and Mimic screen, press any control panel pushbutton
once.
PRESS ANY KEY TO CONTINUE
2
Figure 7‐2. UPS Control Panel
S
www.eaton.com/powerquality
164201701 Rev 4
3
1