Using The Menu - Eaton Power Xpert Plus 1 Installation And Operation Manual

7.2.4

Using the Menu

The UPS menu bar allows you to display data in the information area to help you
monitor and control UPS operation. Table 7‐2 shows the basic menu structure.
Table 7‐2. Display Function Menu Map
Menu Option Description
CONTROLS
7.2.5 Mimic Screen
Figure 7‐4 shows the Main Menu and Mimic screen. To select the Mimic screen from
the Events, Meters, Controls, or Setup screens, press the
current menu bar.
The Mimic screen shows the internal components of the UPS cabinet and a real‐time
graphical representation of the operating status of the system.
TIME: 11 : 35 : 43
INPUT
BATT
BYPASS
EVENTS METERS
Figure 7‐4. Main Menu and Mimic Screen (Online Mode)
t
Power Xpert 9395 UPS (450–550 kVA) Installation and Operation Manual
EVENTS Displays the list of Active System Events and a historical log of system events.
METERS Displays performance meters for the system or critical load.
Displays the System Status screen.
SETUP Allows you to set the display contrast, set the date and time for the time stamp,
configure the UPS serial communication ports, and view the firmware version numbers.
LOAD OFF De-energizes the critical load and powers down the UPS.
ESC Returns to Main Menu and Mimic screen from the Events, Meters, Controls, or Setup
screens. Returns to the main System Setup Level screen from a setup submenu.
Return arrow acknowledges or executes a command, or saves a setting.
Up and down arrows scroll through screens and lists or highlight settings.
Left and right arrows select or adjust settings displayed on the screen.
UPS
CONTROLS
UPS OPERATING INSTRUCTIONS
DATE: 02 / 25 / 2004
STSW
LOAD OFF
SETUP
S
www.eaton.com/powerquality
164201701 Rev 4
pushbutton on the
ESC
OUTPUT
7-5