Transfer From Bypass To Energy Saver Mode; Transfer From High Alert To Online Mode - Eaton Power Xpert Plus 1 Installation And Operation Manual

7.4.10

Transfer from High Alert to Online Mode

To transfer the critical load to Online mode:
NOTE The High Alert mode commands are displayed only if enabled at the factory or by an Eaton Customer
Service Engineer.
1.
2.
3.
4.
5.
7.4.11

Transfer from Bypass to Energy Saver Mode

To transfer the critical load to Energy Saver mode:
NOTE The Energy Saver mode commands are displayed only if enabled at the factory or by an Eaton
Customer Service Engineer.
1.
2.
3.
4.
5.
t
Power Xpert 9395 UPS (450–550 kVA) Installation and Operation Manual
On any UPS, press the
CONTROLS
Status screen is displayed.
On the System Status screen, select the
Press the pushbutton on the System Status menu bar. The UPS
CONTROLS
Control Command screen is displayed.
On the UPS Control Command screen, select
Press the pushbutton on the UPS Command menu bar.
SELECT
All of the UPSs transfer to Online mode.
status indicator is illuminated. The UPS status indicates ONLINE. The
The
ONLINE
UPM status indicates ONLINE.
On any UPS, press the
CONTROLS
Status screen is displayed.
On the System Status screen, select the
Press the pushbutton on the System Status menu bar. The Bypass
CONTROLS
Control Command screen is displayed.
On the Bypass Control Command screen, select
Press the pushbutton on the Bypass Command menu bar.
SELECT
All of the UPSs transfer to Online mode and then to Energy Saver mode. The
critical load is supplied by the bypass source.
status indicator is illuminated. The UPS status indicates ENERGY
The
ONLINE
SAVER. The Bypass status indicates ON. The UPM status indicates ONLINE. If
the battery is not charging, the power module is off.
UPS OPERATING INSTRUCTIONS
pushbutton on the main menu bar. The System
command.
UPS
GO TO ONLINE
pushbutton on the main menu bar. The System
command.
BYPASS
GO TO ENERGY SAVER
S
www.eaton.com/powerquality
164201701 Rev 4
.
.
7-33