System Status Screen And Controls - Eaton Power Xpert Plus 1 Installation And Operation Manual

UPS OPERATING INSTRUCTIONS
7.6.13

System Status Screen and Controls

Press the SYSTEM CONTROLS pushbutton on the main menu bar to display the
System Status screen. Online operation, transfer to bypass, UPM start up and
shutdown, and LOAD OFF commands are controlled through this screen. In addition,
the screen displays the current status of the UPS, indicates whether the UPS is in
Maintenance Bypass or Bypass, and displays the state of the UPM. Figure 7‐32
shows the System Status screen.
Figure 7‐32. System Status Screen
Figure 7‐33 shows the Module Controls screen. This screen allows control of the
individual modules within the system. It also gives their values and status.
Figure 7‐33. Module Controls Screen
t
7-61
S
www.eaton.com/powerquality
Power Xpert 9395 UPS (450–550 kVA) Installation and Operation Manual 164201701 Rev 4