Basic copy operations
–
The factory default settings for this machine are listed below.
[Density]: Auto
[Background Removal]: Standard
[Paper]: Auto (Auto Paper Select)
[Zoom]: Full Size (100.0%)
[Duplex/Combine]: 1 > 1
[Original Type]: Text/Photo
–
For details on selecting settings in the Original Setting screen, refer to
–
For details on selecting a Paper setting, refer to
–
For details on specifying a Zoom setting, refer to
–
For details on selecting the original and copy settings, refer to
–
For details on selecting the original image quality, refer to
–
For details on selecting a copy density setting, refer to
–
For details on specifying combined copy settings, refer to
–
For details on selecting Finishing settings, refer to
–
For details on selecting the Fold/Bind settings, refer to
–
For details on specifying settings to not rotate the image, refer to
–
For details on specifying settings for the Application functions, refer to
4
Using the keypad, type in the desired number of copies.
–
If the number of copies was incorrectly entered, press the [C] (clear) key in the keypad, and then
specify the correct number of copies.
5
Press the [Start] key.
–
To stop the copy operation being performed, press the [Stop] key. For details, refer to
–
The next copy operation can be queued while a copy operation is being performed. For details, refer
to
page
VarioLink 6022/7522
2-77.
page
page
2-30.
page
2-32.
page
2-42.
page
2-50.
page
2-52.
page
2-47.
page
2-54.
page
2-65.
page
2-76.
page
2
2-16.
7-2.
page
2-78.
2-3