Table of Contents
Advertisement
Additional copy operations
The Check Job Settings screen appears.
There are four Check Job Settings screens. The number to the right of the screen title indicates the
number of the currently displayed screen.
To display the previous screen, touch [←Back]. To display the next screen, touch [Forward→].
5
Check the copy settings registered with the selected copy program.
6
Touch [Close].
The Recall Copy Program screen appears again.
7
Again touch the button for the copy program registered with the copy settings to be recalled.
–
If [OK] is touched with no copy program selected, the Basic screen appears again without a copy
program being recalled.
8
Touch [OK].
The programmed copy settings are recalled and the Basic screen appears again.
9
Press the [Start] key.
Copying begins with the recalled copy settings.
Note
To stop recalling a copy program, press the [Reset] key or the [Mode Memory] key or touch [Cancel].
VarioLink 6022/7522
3
3-12
Advertisement
Table of Contents
Troubleshooting
