Oce VarioLink 6022 User Manual page 483

Authentication Unit (Biometric Type AU-101)
4
Touch [Edit].
5
Position the finger on the authentication unit to scan the finger vein pattern.
– Scan the finger vein pattern three times, removing and repositioning the same finger, and touch [OK]
after each time.
6
Touch [Close], and then touch [Close] in the next screen that appears.
7
Type the user name and the password.
8
If desired, specify the function limitations.
9
Touch [OK].
10
Touch [Close].
Registering from Data Administrator
In order to use Data Administrator, settings must be specified on the machine and the setup procedure must
be performed. The setup procedure includes installing BioDriver (USB-Driver) of the authentication unit, then
installing Data Administrator Bio Plugin.
Reminder
Data Administrator ver. 4.0 or later must first be installed on the computer. For details on the operating
environment and installation procedure for Data Administrator, refer to the User's Guide for the Data
Administrator.
Checking the currently installed version
1
From the "Help" menu of Data Administrator, click "Version Information".
– If the version appears as "3.x": This software cannot be used. Install version 4.x.
– If Data Administrator ver. 3.x is installed, it is removed when version 4.x is installed.
VarioLink 6022/7522
12
12-6