Table of Contents
Advertisement
Application functions
–
If a decimal value is displayed in the screen and the specified value is outside the allowable range,
the message "Input Error" appears.
Type a value within the allowable range. If the value was incorrectly entered, press the [C] (clear) key
to erase the value, and then specify the correct value.
What are the limits on the adjustment amount?
?
% The print position can be finely adjusted in 1/16 inch increments.
?
Can no adjustments be made?
% To make no left/right or up/down adjustments, touch [No Adjustment].
6
If necessary, specify the other settings.
–
To specify the text size, touch [Text Size], and then select the size The factory default is 10 pt.
7
Touch [OK], and then touch [Close] in the next screen that appears.
8
Specify any other desired copy settings.
–
To cancel the setting and select the default, press the [Reset] key.
9
Using the keypad, type in the desired number of copies.
10
Press the [Start] key.
VarioLink 6022/7522
7
7-54
Advertisement
Table of Contents
Troubleshooting
