Oce VarioLink 6022 User Manual page 124

Basic copy operations
2
Touch [1-Sided > 2-Sided] or [2-Sided > 2-Sided].
– Specify the position of the binding margin and the orientation of the loaded original, otherwise the
copies will not be printed as desired.
– If the binding position for the original is set to "Auto", the position of the binding margin is
automatically selected. A binding margin along the long side of the paper is selected if the original
length is 11-11/16 inch or less. If the original length is more than
11-11/16 inch, a binding margin along the short side of the paper is selected.
– If "Auto" is selected under "Original Binding Position", the binding margin is set at the top or at the
left.
– If the binding position for the copy is set to "Auto", the binding position is automatically determined
according to the orientation of the loaded original. If the original length is 11-11/16 inch or less, a
binding position along the long side of the paper is selected. If the original length is more than 11-
11/16 inch, a binding position along the short side of the paper is selected.
– If the binding position for the copy is set to "Auto", the binding position is set at the top or at the left.
3
Touch [Binding Position].
– For a single-sided original, select the binding position for the copy, and then touch [OK].
VarioLink 6022/7522
2
2-45