Table of Contents
Advertisement
Utility mode
Note
[Low Power Mode Settings] appears only if the "Administrator Security Levels" parameter in
Administrator mode is set to [Level 1], [Level 2].
!
Detail
For details on the "Administrator Security Levels" parameter, refer to
page
11-33.
Output Settings
Parameter
Print/Fax Output Setting
Output Tray Setting
Note
The "Output Tray Settings" parameter is available only if the optional finisher is installed.
Blank Page Print Settings
Description
Select whether or not stamps and overlays are printed on blank pages.
Density for Original Type
Description
Shift the exposure level darker/lighter within 6 levels for each original type, which will be
reflected to 9 levels of the Density setting available on the Basic screen.
Page Number Print Position
Description
Specify the print position of the stamp on back pages when duplex printing and booklet
are used in combination.
Note
[Output Settings], [Blank Page Print Settings], [Density for Original Type], and [Page Number Print
Position] appear only if the "Administrator Security Levels" parameter in Administrator mode is set to
"Level 2".
VarioLink 6022/7522
Description
Specify settings for faxing and print-
ing. For details, refer to the User's
Guide [Network Scan/Fax/Network
Fax Operations] and the User's
Guide [Print Operations].
Select the copy output tray for each
type of job (copies, printouts, re-
ports and faxes).
"Security Settings" on
Default Setting
Copy: Tray 1
Print: Tray 1
Print Reports: Tray 2
Fax: Tray 2
Default Setting
Do Not Print
Default Setting
Text/Photo: 3
Text: 3
Photo: 3
Dot Matrix Original: 2
Default Setting
All the same
11
11-16
Advertisement
Table of Contents
Troubleshooting
