Oce VarioLink 6022 User Manual page 425

Utility mode
List/Counter
Parameter
Management List
Paper Size/Type Counter
Reset Settings
Parameter
System Auto Reset
Auto Reset
Job Reset
System Auto Reset for Proof Copy
Reminder
Even if the System Auto Reset Time is [OFF], the System Auto Reset function is activated after 1 minute
of no operation of the machine during the User Authentication or Account Track. However, when in the
Enlarge Display mode, the System Auto Reset function is not activated.
If user authentication settings have been specified or "Enhanced Security Mode" has been set to "ON",
the logoff from Administrator mode or user authentication mode will be performed according to the
"System Auto Reset Time" parameter.
User Box Settings
VarioLink 6022/7522
Job Settings List
Description
Specify the desired length of time until the auto-
matic system reset operation is performed.
• Priority Mode:
Select the setting ("Copy" or "Scan/Fax") for
the mode that the machine enters when the
automatic system reset operation is per-
formed.
• System Auto Reset Time:
Specify the setting (between 1 and 9 minutes
or "OFF") for the desired length of time until
the automatic system reset operation is per-
formed.
Select the setting (between 1 and 9 minutes or
"OFF") for the desired length of time until the au-
tomatic panel reset operation is performed for
each mode (Copy and Scan/Fax).
When Account is Select whether or not the settings are reset (initial-
changed ized) when the user has changed.
This machine detects that the user has changed
when the optional key counter has been removed
or when the user has logged off if user authentica-
tion or account track settings are specified.
When original Select whether or not the settings are reset when
is set on ADF an original is loaded into the automatic document
feeder.
Next Job Staple Setting:
Select whether the same Staple setting from the
previous job is set or the setting is canceled when
that job begins and the settings for the next job
can be specified.
Original Set/Bind Direction:
Select whether the same Original Direction and
Binding Position settings from the previous job are
set or the settings are canceled when that job be-
gins and the settings for the next job can be spec-
ified.
Reset Data After Job:
Select whether the same settings for a scan oper-
ation or for a fax transmission from the previous
job are set or the settings are canceled when that
job is completed and the settings for the next job
can be specified. (However, even if "OFF" is se-
lected, the destination is cleared.)
Select whether or not to activate the automatic
system reset after the proof copy operation is per-
formed.
Description
The machine settings can be printed.
Store combinations of paper sizes and paper types to be
counted.
11
Default Setting
Priority Mode:
Copy
System Auto Reset
Time: 1 Minute
Copy: 1 Minute
Scan/Fax: 1 Minute
Reset
Do Not Reset
OFF
OFF
ON
No
11-27