Basic copy operations
Center Staple &
*2
Fold
*2
Tri-Fold
*1
Foolscap includes the following 4 types: 8-1/8 × 13-1/4 w, 8-1/4 × 13 w, 8-1/2 × 13 w, 8 × 13 w, one of
which can be selected. For details, contact the service representative.
*2
Can be used only with Finisher FS-610.
!
Detail
When manually performing the hole-punching operation from the post inserter control panel, only two
holes can be punched.
Names of control panel parts
Finishing
1
Load the paper into the lower tray of the post inserter.
–
If the "Corner" or "2 Position" Staple settings are to
be used, load the paper face up
–
If a Punch setting is to be used, load the paper face
up.
–
If the paper is to be stapled and folded at the center,
load the paper so that the side that is to be the front
when bound is face up.
–
If the paper is to be folded in three, load the paper so
that the side that is to be the outside when folded in
three is face up.
–
The loaded paper will be finished into one set.
VarioLink 6022/7522
Paper weight
Paper size
Plain paper (16 lb to
Standard sizes:
21-1/4 lb)
11 × 17 w, 8-1/2 ×
14 w, 8-1/2 × 11 w,
A3 w, B4 w, A4 w,
8K w, wide paper
(11 × 17W w, 8-1/2
× 11W w, A3W w,
B4W w, A4W w)
Plain paper (16 lb to
8-1/2 × 11 w, A4 w,
24 lb)
16K w
Center Staple & Fold
Corner Staple
[Finishing] key
2 Position Staple
Tri-Fold
Number of sheets
20 sheets (16 lb to
21-1/4 lb)
16 sheets (21-1/2 lb
to 24 lb)
3 sheets (16 lb to
21-1/4 lb)
1 sheet (21-1/2 to 24
lb)
[Punch] key
[Start/stop] key
2
Output tray
Booklet tray
Booklet tray
2-74