Authentication Unit (Biometric Type AU-101)
8
Specify the desired settings, and then click [Print].
The print job is sent.
9
Position the registered finger on the authentication unit.
–
Make sure that "Begin Printing" is selected.
–
To select the print job to be printed, touch [Screen Operation]. For details, refer to
print job to be printed from the control panel" on page
The user is authenticated, and the print job is printed.
Selecting the print job to be printed from the control panel
Follow the procedure described below to select the document to be printed from those saved in the Touch
& Print user box.
1
Touch [Screen Operation].
VarioLink 6022/7522
"Selecting the
12-22.
12
12-22