Oce VarioLink 6022 User Manual page 433

Utility mode
HDD Settings
Parameter
Check HDD Capacity
Overwrite Temporary
Data
Overwrite All Data
HDD Lock Password
Format HDD
HDD Encryption Setting
Function Management Settings
Parameter
Network Function Usage Settings
!
Detail
The following functions cannot be used if "Network Function Usage Settings" is set to "OFF".
PC-FAX transmission
Using the HDD TWAIN driver to view and retrieve documents in user boxes
Using Box Operator to view and retrieve documents in user boxes
Using Scan Direct to retrieve documents in user boxes
Using Job Spooler to view and retrieve documents in user boxes
Box operations using the Web Connection (The User Box tab does not appear.)
Stamp Settings
Parameter
Apply Stamps
Delete Registered Stamp
Driver Password Encryption Setting
Description
The encryption password for the printer driver can be changed. For details, refer to the
User's Guide [Print Operations].
Flash Memory Lock Password
Description
Specify the flash memory locking password.
VarioLink 6022/7522
Description
Information concerning the hard disk capacity is displayed.
Specify whether or not to overwrite the temporary image data
saved on the hard disk with all operations for copying, scanning,
faxing and computer printing. For details on the settings, refer
to the User's Guide [Box Operations]. By specifying a setting to
overwrite temporary data, the area of the hard disk where image
data is saved after printing or sending can be overwritten, and
the data can be erased. This process prevents disclosure of im-
age data on the hard disk.
Select this parameter to overwrite and delete all data on the en-
tire hard disk in the specified patterns for mode 1 through mode
8 when returning the machine from lease or disposing the ma-
chine in order to prevent disclosure of the data. For details on
the settings, refer to the User's Guide [Box Operations]. Before
performing this operation, contact your service representative.
Specify the password for protecting data on the hard disk. For details, refer to the User's
Guide [Box Operations].
Format the hard disk. For details, refer to the User's Guide [Box Operations].
This setting appears when the optional Security kit is installed.
Specify an encryption passphrase to encrypt data in the hard disk.
For details, refer to the User's Guide [Box Operations]. When a setting is specified, all data
written to the hard disk is encrypted to protect it. If the encryption key is changed, the hard
disk will be reformatted.
Description
Specify settings for network func-
tions that are difficult to count when
managing operations.
Description
Select whether or not a stamp is added when printing or sending.
Select whether or not stamps registered for copy protection can be deleted.
Default Setting
NO
Mode 1
Default Setting
ON
Default setting
Use Factory Default
11
11-35