Oce VarioLink 6022 User Manual page 508

Authentication Unit (IC Card Type AU-201)
5
Position the IC card on the authentication unit, and then touch [OK].
6
After the message "Registered" appears, touch [Close], and then touch [Close] in the next screen that
appears.
7
Type the user name and the password.
8
If desired, specify the function limitations.
9
Touch [OK].
10
Touch [Close].
Registering from Data Administrator
In order to use Data Administrator, settings must be specified on the machine and the setup procedure must
be performed. The setup procedure includes installing IC Card Driver (USB-Driver) of the authentication unit,
then installing Data Administrator IC Card Plugin.
Reminder
Data Administrator ver. 3.0 or later must first be installed on the computer. For details on the operating
environment and installation procedure for Data Administrator, refer to the User's Guide for the Data
Administrator..
Setup
1
Turn off the machine with the main power switch, and then disconnect the authentication unit from the
machine.
2
Install IC Card Driver (USB-Driver).
– Plug the cable from the authentication unit into the USB port on the computer.
– The Found New Hardware Wizard starts.
VarioLink 6022/7522
13
13-6