Table of Contents
Advertisement
Basic copy operations
–
To specify a standard size, touch the button for the desired original size.
–
To specify a custom size, touch [Custom Size] to display the Custom Size screen. Specify the X and
Y sides of the paper, and then touch [OK].
–
Touch [X] or [Y], touch [<->] to switch between the integer and the fraction, and then touch [-] and
[+] to specify the size of the paper.
–
If a decimal value is displayed in the Custom Size screen, use the keypad to type in the setting. For
details on switching between decimal and fraction values, refer to
page
–
To cancel changes to the settings, touch [Cancel].
–
If a decimal value is displayed in the screen and the specified value is outside the allowable range,
the message "Input Error" appears. Type a value within the allowable range. If the value was
incorrectly entered, press the [C] (clear) key to erase the value, and then specify the correct value.
VarioLink 6022/7522
Original Size screen
11-15.
Custom Size screen
"System Settings" on
2
2-17
Advertisement
Table of Contents
Troubleshooting
