Before Making Copies
1.5
Loading paper into the tray 3 or 4
To load paper (tray 3 or 4)
1
Pull out the tray 3 or 4.
2
Raise the paper take-up roller.
3
Load the paper into the tray.
–
Load the paper so that it is flush against the right side
of the tray.
4
Slide the lateral guide to fit the size of paper being loaded.
–
Move the lateral guide while holding the release
button pressed. When the button is released, the
guide is locked in place.
5
Fully push in the paper tray.
Reminder
Do not load so much paper that the top of the stack is higher than the , mark.
VarioLink 6022/7522
1
1-48