Oce VarioLink 6022 User Manual page 424

Utility mode
Parameter
Finisher
Adjustment
Scanner
Area
ADF Centering
*1
Appears only when Finisher FS-610 is installed.
*2
Appears only when finisher is installed with punch kit.
*3
Appears only when Z folding unit is installed.
*4
Appears only when post inserter is installed.
!
Detail
[Finisher Adjustment] appears only when an optional finisher is installed.
The Finisher Adjustment parameters that are available differ depending on the model of the installed
finisher.
VarioLink 6022/7522
Description
Center Staple Po- Adjust the stapling position (between -12, 8 mm
*1
sition and 12, 7 mm) when printing with the "Center Sta-
ple & Fold" setting.
Half-Fold Posi- Adjust the folding position (between -12, 8 mm
*1
tion and 12, 7 mm) when printing with the "Center Sta-
ple & Fold" setting.
Punch Vertical Po- Adjust the vertical position of the punched holes
*2
sition Adjustment between -5.0 mm and 5.0 mm.
Punch Unit Vertical Adjust the vertical position of the punched holes
Position Adjust- between - 5.0 mm and 5.0 mm for each paper
3
ment * size.
Punch Horizontal Adjust the horizontal position of the punched
Position Adjust- holes between -5.0 mm and 5.0 mm.
*2
ment
Punch Unit Hori- Adjust the horizontal position of the punched
zontal Position Ad- holes between - 5.0 mm and 5.0 mm.
3
justment *
Punch Resist Loop Adjust the hole-punching shift for double-sided
*2
Size Adjustment printing and outputting cover pages between
-16.0 mm and 16.0 mm.
1st Z-Fold Position Adjust the 1st folding position between - 12.8 mm
*3
Adjustment and + 12.7 mm for each paper size.
2nd Z-Fold Posi- Adjust the 2nd folding position between - 12.8
*3
tion Adjustment mm and + 12.7 mm for each paper size.
Tri-Fold Position Adjust the folding positions (between -12.8 mm
*1
Adjustment and 12.7 mm) when printing with the "Tri-Fold"
setting.
2-Position Staple Adjust the distance (between 128 mm and 160
*1
Pitch Adjustment mm) between staples when printing with the "2
Position" Staple setting ("Staple" and "Center
Staple & Fold").
Post Inserter Adjust the sensor for detecting the size of paper
Feeder loaded in the paper trays of the post inserter.
Size
*4
Adjustment
Scanner Adjust- Adjust the starting scan position between -2.0 mm
ment: Leading and +6.0 mm at the leading edge of the original
Edge (with respect to the image scan direction).
Scanner Adjust- Adjust the starting scan position between -3.0 mm
ment: Centering and +3.0 mm at the left edge of the original (with
respect to the image scan direction).
Vertical Adjust- If the scanned image is distorted (stretched or
ment compressed), the zoom ratio in the feed direction
of the original in the scanner area can be adjusted
between -2.0% and +2.0%.
Adjust the center position in the transverse feed
direction of the original between -3.0 mm and +3.0
mm.
11
Default Setting
0.0 mm
0.0 mm
0.0 mm
0.0 mm
0.0 mm
0.0 mm
0.0 mm
0.0 mm
0.0 mm
0.0 mm
128 mm
-
0.0 mm
0.0 mm
1.00%
0.0 mm
11-26