Table of Contents
Advertisement
Before Making Copies
No.
Item Name
1
Message display area
2
Functions/settings display
area
3
Icon display area
4
[Auto Rotate OFF] button
5
[Separate Scan] button
6
[Finishing] button
7
Left panel
8
[Check Job] button
9
[Job List] button
!
Detail
The basic settings screen (Basic screen or Quick Copy screen) that appears can be set with the "Copier
Settings" parameter in the Custom Display Settings screen (displayed from the User Setting screen in
Utility/Counter mode). The arrangement of the buttons and screens differ with the Basic screen and
Quick Copy screen; however, the functions that can be set are the same. As a default, "Basic" is
selected. This manual contains descriptions of procedures using the Basic screen that appears when
"Basic" is selected.
The Quick Copy screen displays all of the settings from the Basic screen so that many settings can
easily be specified.
!
Detail
For details on switching the basic settings screen, refer to
Note
If settings have been changed from the factory defaults, the tab for the screen containing the changed
settings appears framed with a green line.
The green line can be changed to another color with the "Color Selection Settings" parameter in the
Custom Display Settings screen (displayed from the User Setting screen in Utility/Counter mode).
VarioLink 6022/7522
Description
The status of the machine and details on operations are displayed.
Tabs and buttons for displaying screens containing various functions are dis-
played.
Touch a tab or button to display the corresponding screen for specifying the
settings.
Icons indicating the status of jobs and the machine are displayed.
Touch to copy with the image not rotated to fit the orientation of the loaded
paper.
Touch to scan the original in separate batches.
An original scanned in different batches can be treated as a single copy job.
Touch to specify settings for collating, grouping, stapling, or hole punching.
When the [Job List] button is pressed, a screen showing the jobs currently be-
ing performed or waiting to be performed is displayed.
When the [Check Job] button is pressed, a screen showing the result of the
specified settings is displayed.
The result of the specified settings is displayed.
Jobs currently being performed or waiting to be performed are displayed.
Various commands for checking and managing jobs are available.
"Custom Display Settings" on page
1
11-17.
1-25
Advertisement
Table of Contents
Troubleshooting
