Table of Contents
Advertisement
Authentication Unit (Biometric Type AU-101)
–
When combined with account track settings, set "Synchronize User Authentication & Account
Track" to "Synchronize". If "Do Not Synchronize" is selected, the Touch & Print function cannot be
used.
3
Touch [8 Authentication Device Settings], then [1 General Settings], then [Bio Authentication].
4
Select the desired settings under "Beep Sound" and "Operation Settings".
–
Under "Beep Sound", select whether or not a beep is produced when scanning of the finger vein
pattern is completed successfully.
–
Under "Operation Settings", select the logon method after registration.
1-to-many authentication: Logon is possible simply by positioning the finger.
1-to-1 authentication: Logon is possible by entering a user name and positioning the finger.
–
For details on logging on, refer to
5
Touch [OK], and then touch [OK] in the next screen that appears.
6
Touch [2 Touch & Print Setting].
VarioLink 6022/7522
"Logging on to this machine" on page
12
12-16.
12-3
Advertisement
Table of Contents
Troubleshooting
