Application functions
type in the setting. For details on switching between decimal and fraction values, refer to
Settings" on page
If a decimal value is displayed in the screen and the specified value is outside the allowable range,
the message "Input Error" appears. Type a value within the allowable range. If the value was
incorrectly entered, press the [C] (clear) key to erase the value, and then specify the correct value.
7
In the Basic screen, touch [Paper], and then select the paper tray loaded with the paper.
–
If settings were specified in the 2/4/8 Repeat screen, touch [Zoom] in the Basic screen, and then
specify the zoom ratio setting.
8
Specify any other desired copy settings.
–
To cancel the setting and select the default, press the [Reset] key.
9
Using the keypad, type in the desired number of copies.
10
Press the [Start] key.
VarioLink 6022/7522
11-15.
7
"System
7-32