Application functions
2
Touch [Application], and then touch [Erase].
–
To cancel changes to the settings for all Application functions, press the [Reset] key. All changes to
the settings are canceled.
The Erase screen appears.
3
Touch [Center Erase].
The Center Erase screen appears.
4
Touch [<->] to switch between the integer and the fraction, and then touch [–] and [+] to specify the
width to be erased.
–
When using the keypad to specify the settings, press the [C] (clear) key, and then specify the setting.
–
To cancel the setting and select the default, press the [Reset] key.
–
To cancel the "Center Erase" function, touch [No].
?
What happens when a value outside of the allowable range is specified?
% The massage "Input error" appears. If "Input error" appears or if the erased width was incorrectly
entered, press the [C] (clear) key in the keypad, and then specify the correct value.
VarioLink 6022/7522
7
7-48