Oce VarioLink 6022 User Manual page 423

Utility mode
Expert Adjustment
Parameter
Density for Original Type
Erase
Adjustment
Printer
Adjustment
2nd-Side
Size
Adjustment
VarioLink 6022/7522
Description
Shift the exposure level darker/lighter within 5 lev-
els for each original type, which will be reflected to
9 levels of the Density setting available on the Ba-
sic screen.
Non-Image Area Select the condition for Non-Image Area Erase to
Erase function.
Non-Image Area Select the setting method, erasing mode, and
Erase Setting original density for the Non-Image Area Erase
function.
ADF Frame Erase Specify the erasing width for the ADF Frame Erase
function.
Leading Edge Ad- Adjust the starting print position between -3.0 mm
justment and +6.0 mm at the leading edge of the paper
(with respect to the paper feed direction). Adjust-
ments can be specified for each paper type.
Centering Adjust the starting print position between -6.4 mm
and +6.3 mm at the left edge of the paper (with re-
spect to the paper feed direction).
Vertical Adjust- If the copy image is distorted (stretched or com-
ment pressed), the paper feed speed and printing
speed can be synchronized to adjust the distor-
tion of the copy image between -1.35 and +5.00.
Horizontal Adjust- If the copy image is distorted (stretched or com-
ment pressed), the zoom ratio in the transverse feed di-
rection of the original can be adjusted between -
1.0% and +1.0%.
Adjust the zoom ratio for the back side of double-sided copies for each
paper tray.
Adjust Ratio:[No Selection], [-0.1%], [-0.2%], [-0.3%]
11
Default Setting
Text: 3
Text/Photo: 3
Photo: 3
Dot Matrix Original: 2
Except Original
Glass ×1.0
Erase Setting: Specify
How to Erase: Rectan-
gular
Original Density: Stand-
ard
3 mm
0.0 mm
0.0 mm
0.0%
0.0%
No Selection
11-25