Authentication Unit (IC Card Type AU-201)
7
Select "Recipient User", and then enter the user name and password.
8
Click [Verify] to check the user ID.
9
Click [OK].
–
If the user name or the password is incorrect, type in the correct information.
10
Click the [OK] button.
11
Specify the desired settings, and then click [OK].
12
Click [Print].
The print job is sent.
13
Position the registered IC card on the authentication unit.
–
Make sure that "Begin Printing" is selected.
–
To select the print job to be printed, touch [Screen Operation]. For details, refer to
print job to be printed from the control panel" on page
The user is authenticated, and the print job is printed.
VarioLink 6022/7522
"Selecting the
13-24.
13
13-21