Table of Contents
Advertisement
Additional copy operations
–
For details on typing in text, refer to
5
After typing in the name, touch [OK].
–
The copy program can be given the same name as a copy program that has already been registered.
–
To stop specifying the name of the copy program, touch [Cancel].
The Recall Copy Program screen appears again. The copy program is registered and a button with the
entered copy program name appears.
Can the copy program name be corrected?
?
% To change the entered copy program name, touch the button whose name is to be changed, and
then touch [Edit Name]. The Edit Name screen appears. Return to step 4 and repeat the procedure
to change the copy program name.
?
Can the specified settings for a copy program be checked?
% To check the programmed copy settings, touch the button for the desired copy program, and then
touch [Check Program Settings]. For details, refer to
(Mode Memory)" on page
VarioLink 6022/7522
"Entering text" on page
"Copying with programmed copy settings
3-11.
14-2.
3
3-9
Advertisement
Table of Contents
Troubleshooting
