STORING SNAPSHOTS
The Si Series has the ability to store 'Snapshots' of the control surface settings so
that they can be recalled at a later date. This is very useful for storing different
console setups for example in a situation where there might be 2 or 3 different
artists performing who each require completely different console settings.
Storing a basic Snapshot
To store a snapshot press the STORE button in the CUE CONTROL section at any
time. A new snapshot will be created and added to the Cue List.
Naming a snapshot
Press the EDIT CUE tab and scroll to the Cue Name field in the display. Press the
ADJUST knob to bring up the Alpha/Numeric keypad and enter the new name.
Press the APPLY button to apply the new name.
Page 26
Soundcraft® Si Series Quick Start Guide Issue 1010