Metering; Input And Dynamics Metering; Output Metering - SoundCraft Si3 User Manual

METERING

Input and Dynamics Metering

Signal level metering for the input channels is displayed on the OLED screens found above each channel
fader.
Hi-cut and/or Lo-cut Filter IN
Routed to at least one Aux bus

Output Metering

Signal level metering for all output buses is displayed on the 12-segment bar graph meters located at the top
of the console.
There is dedicated metering for the following:
Left, Right and Centre buses
Buses 1-24
Matrix Outputs 1-8
Soundcraft® Si3 User Guide
Phantom Power ON
Phase reverse IN
Delay IN
Gate IN
Compressor IN
EQ IN
(Active) Insert
Routed to the Mix buses
Channel Meter & Scale
Channel Number & Rearcon ID
Parameter Name & Value
for Encoder above
Gate Indicators
X = Closed
H = Hold
O = Open
VCA 1-12
Indicators
(Illuminated
blocks show
VCA groups
Compressor's
Gain Reduction
Meter & Scale
Page 2 - 9