Private Network [9]; Tie Table [9] - Panasonic KX-TDA50 Features Manual

4.15 Private Network [9]

4.15 Private Network [9]

4.15.1 TIE Table [9]

A TIE line is a privately leased communication line between two or more PBXs, which provides cost effective
communications between company members at different locations.
A maximum of 32 TIE Line Routing and Modification Tables can be programmed. It is necessary to make
unified tables with all PBXs at different locations in a TIE line network in order to identify the CO line route
when an extension makes or receives a TIE line call.
There are two types of routing methods: Extension Number Method which works on an extension number
basis, and PBX Code Method which works on a PBX code basis.
Own PBX Code
Specifies the own PBX code to employ PBX Code Method for a TIE line network. If this cell is left empty,
Extension Number Method is employed.
Default
Not stored.
Value Range
Max. 7 digits (consisting of 0–9)
Programming References
None
Feature Guide References
1.25.1.2 PBX Code Method (Access with PBX Code)
Network PBX ID
Specifies the Network ID of the PBX. This parameter must be set to correspond with the Network IDs
assigned to other PBXs in the network.
Network IDs 1-8 can only be assigned to one PBX each within a network. Assigning the same Network ID
to two PBXs will cause network data transmission problems.
Changing this value in Interactive mode will automatically clear any NDSS Link Data.
Default
0
Value Range
0: The PBX retransmits BLF data sent by other PBXs.
1: The PBX receives BLF data sent by other PBXs.
2–8: The PBX transmits BLF data over the network.
Programming References
None
622 Feature Guide