Fax T30 Log Error Codes - Lexmark X925 Service Manual

Fax T30 log error codes

Fax error log codes
Error code
000
200
3XX
4XX
5XX
6XX
7XX
800
802
803
804
805
808
809
Description
No error occurred during fax
transmission
Error occurred when transmitting
training.
Error occurred when receiving
image data.
Error occurred when sending
image data.
Received unknown response from
remote fax device.
Error occurred when receiving a frame.
Error occurred when sending a frame.
Received EOT unexpectedly from
the modem in V34 mode.
Too many timeouts occurred
during ECM reception.
Fax cancelled by user
Unexpectedly received a disconnect
command from the remote end.
Remote fax device failed to respond to
the DCS command.
T1 timeout occurred when trying to
establish a connection with a remote
fax device.
T2 Timeout occurred due to loss of
command/response synchronization.
Action
No action needed
• Check line quality.
• Select a lower 'Max Speed'.
• value under Fax Send settings
• Adjust the transmit level.
• Check line quality.
• Adjust 'Receive Threshold'.
• Select a lower 'Max Speed' value
under Fax Receive settings.
• Check line quality.
• Adjust 'Transmit Level'.
• Select a lower 'Max Speed' value
under Fax Receive settings.
No action needed. Issue is with the other
device.
• Check line quality.
• Adjust 'Receive Threshold'.
• Check line quality.
• Adjust 'Transmit Level'.
• Select a lower 'Max Speed' value
under Fax Send settings.
• If error persists disable V34 modulation
scheme.
• If error persists disable ECM mode.
No action needed.
• Check line quality.
• Adjust Transmit Level/Receive
Threshold values.
• Remote device could be requesting an
unsupported feature.
• Adjust Transmit Level/Receive
Threshold values.
• Remote device could be
malfunctioning.
• Adjust Transmit Level/Receive
Threshold values.
• Adjust Transmit Level/Receive
Threshold values.
Diagnostic information
7541-03x
2-41