Carriage Home; Lamp Failure (Front Side); Device Had Modem Installed, But Config Id Indicates It Should Not; Device Had Hd Installed, But Config Id Indicates It Should Not - Lexmark X925 Service Manual
Hide thumbs
Also See for X925:
- User manual (334 pages) ,
- Quick reference (19 pages) ,
- Maintenance manual (18 pages)
Table of Contents
Advertisement
843.00 Carriage Home
Step
Questions/actions
1
POR the device.Did the error re-occur?
2
Check all the connections from the ICC card to the
CCD carriage, and RIP board to ICC card. Are the
cables properly connected?
3
Properly connect all the cables. Did this fix the issue?
4
POR the machine into diagnostics mode and perform
the scanner sensor test. Is the home position sensor
displaying a 1?
5
Is there any damage to the flag that actuates the home
sensor?
6
Replace the flatbed unit. Did this fix the issue?
7
Replace the ICC card. Did this fix the issue?
8
Replace the CCD. Did this fix the issue?
9
Replace the RIP board. Did this fix the issue?
844.00 Lamp failure (Front side)
Step
Questions/actions
1
Check the FFC ribbon cable connecting the RIP board
to the ICC board on the flatbed for proper connectivity.
Is it properly connected?
2
Re-connect the cable. Did this fix the problem?
3
Check the 8 pin and 30 pin cables on the CCD for
proper connectivity. Are they properly connected?
4
Connect the cables properly. Did this fix the issue?
5
Replace the CCD. Did this fix the problem?
6
Replace the ICC board. Did this fix the problem?
7
Replace the RIP board. Did this fix the problem?
849.01 Device had modem installed, but config ID indicates it should not
Uninstall the modem
849.10 Device had HD installed, but config ID indicates it should not
Uninstall the hard drive.
Yes
No
Go to step 2.
Problem resolved
Go to step 3
Go to step 4.
Problem resolved
Go to step 4.
Go to step.
Go to step 5.
Go to step 6.
Go to step 7.
Problem resolved
Go to step 9.
Problem resolved
Go to step 8.
Problem resolved
Go to step 9.
Problem resolved
Contact your
second level
support.
Yes
No
Go to step 3.
Go to step 2.
Problem resolved
Go to step 3.
Go to step 5.
Go to step 4.
Problem resolved
Go to step 5.
Problem resolved
Go to step 6
Problem resolved
Go to step 7.
Problem resolved
Contact your
second level
support.
Diagnostic information
7541-03x
2-59
Advertisement
Table of Contents
